【Framework】
Frame structure residence refers to a residence made of reinforced concrete poured into load-bearing beams and columns, and then prefabricated with aerated concrete, expanded perlite, pumice, vermiculite, pottery and other light plate partition walls.
It is suitable for large-scale industrial construction, with high efficiency and good project quality.
The frame structure is composed of beams and columns, and the member cross-section is small, so the load-bearing capacity and stiffness of the frame structure are low. Its stress characteristics are similar to vertical cantilever shear beams. The higher the floor, the slower the horizontal displacement. High-rise frames are Both vertical and horizontal directions bear large horizontal forces. At this time, the cast-in-place floor also works as a beam, and the role of assembling the integral floor is not considered. The wall of the frame structure is a filling wall, which plays the role of enclosure and The feature of the frame structure is that it can provide flexible use space for the building.
【Shelf structure】
The structure of the rack. The composition of the row frame is pillars. The pillars on both sides have a roof truss supported on the pillars, forming a row, and another row below. A board is placed between the upper trusses on the two rows to form an empty rack. Houses in a row. The characteristics of the racks: the load-bearing capacity and stiffness within the plane of the racks are relatively large, while the load-bearing capacity between the racks is weak. Usually, corresponding supports should be added between the two brackets to avoid wind and load. Push, lateral movement occurs.
Suitable for single-story industrial factory workshop.
